|
MAY 2011 --
Volvo Trucks is recalling
certain model year 2011-2012
VHD, VNL, and model year
2012 VNM trucks manufactured
from October 15, 2010,
through January 31, 2011,
and equipped with Gunite
automatic slack adjusters.
Due to an incomplete
"knitting" of the iron at
the time of casting,
inadequate
structuralintegrity of the
slack adjuster housing can
occur, which could cause the
housing to break at the
handleunder normal operating
loads. Slack adjusters with
this flow notch could crack
under normal braking
conditions causing loss of
braking which could result
in a vehicle crash. Volvo
Trucks will notify owners
and dealers will replace the
subject slack adjusters free
of charge. The safety recall
is expected to begin on or
before July 1, 2011. .
11V-265
MAY 2011 --
Volvo Trucks is recalling
certain model year 2012 VHD,
VNL, AND VNM trucks equipped
with a Meritor driveline.
The tubing used to assemble
the drivelines has a
nonconforming seam weld with
insufficient bonding of the
material. This can result in
seam weld fracture when
torque is applied. Once the
tube seam weld is fractured,
the driveline may become
inoperable, which may result
in a disabled vehicle or
debris from the driveline
falling onto the roadway,
both of which can increase
the risk of a crash. Dealers
will replace the drivelines
free of charge. The safety
recall is expected to begin
on or before July 1, 2011.
11V-294
JANUARY 2011 -
Volvo Trucks is recalling
certain model year 2011 VNL
trucks manufactured from
March 23, 2010, through
December 22, 2010. There is
a potential for the vehicle
to start without warning
because of an unintended
path to ground that exists.
This can occur when either
the negative battery cable
is disconnected at the
battery/fusible link or if
the fusible link opens as a
result of a short circuit.
This presents a risk of
injury with nonoperational
conditions such as when the
vehicle is being serviced.
Dealers will replace a
wiring harness free of
charge. The safety recall is
expected to begin on or
before March 18, 2011.
11V-050
NOVEMBER 2010 --
Volvo Trucks is recalling
certain model year 2007 and
2009 VHD, model year 2006
through 2010 VN, and model
year 2007 through 2009 VT
trucks manufactured from
November 7, 2005, through
October 30, 2009, equipped
with an air release fifth
wheel. The inversion valve
on the frame may be
orientated where
contaminants can enter the
valve through the exhaust
port. As a result, the brake
valve may corrode. Corrosion
of the valve can cause it to
malfunction, thereby
adversely affecting braking
performance and increasing
the risk of a crash. Dealers
will inspect the inversion
valve and replace as
required. This service will
be performed free of charge.
The safety recall is
expected to begin on or
before January 10, 2010.
10V-571
OCTOBER 2010 --
Volvo is recalling certain
model year 2008-2011 VHD,
VNL, VNM, as well as
2008-2010 VT vehicles for
failing to comply with the
requirements of Part 567,
"Certification." The tire
description may be incorrect
on the vehicle's
certification label. The
misinformation on these
labels could lead to a
vehicle overloading that can
increase risk of a crash.
Dealers will inspect and
replace the labels free of
charge. The safety recall is
expected to begin on or
before December 1, 2010.
Volvo safety recall no.
RVXX1005. 10V-492
AUGUST 2010 --
Volvo Trucks is recalling
certain model year 2009-2010
VN trucks manufactured from
March 1, 2008 through
February 6, 2009. The bottom
track that attaches to the
arms used to open and close
the window may de-bond,
which results in the glass
coming loose at the bottom.
The upper window hinges may
fail and allow the glass to
fall out of the window frame
creating a road hazard and
increasing the risk of a
crash. Dealers will inspect
and repair as required free
of charge. The safety recall
is expected to begin on or
before October 4, 2010.
10V-359
JUNE 2010 --
Volvo Trucks is recalling
certain model year 2001-2006
VNL and VNM trucks
manufactured with a TRW
sealed drag links. Certain
factors can exist, which if
left untreated may result in
a ball socket separation.
Ball socket separation at
the drag link results in
complete loss of steering,
and therefore can result in
a vehicle crash. Dealers
will inspect and repair the
ball socket or the drag link
as required if necessary.
The safety recall is
expected to begin on or
before August 15, 2010.
10V-282
MAY
2009 -- Volvo Trucks is recalling
127,764 MY 2001-2008 VHD,
VNL, VNM, and MY 2005-2008
VT trucks. A seal may fail
allowing water and
contaminants to seep into
the windshield wiper motor.
If this happens a short
circuit may occur, which
over time could possibly
lead to a vehicle fire.
Volvo has not yet provided a
remedy plan including when
repair parts will be
available. Volvo will notify
owners of precautions to
take until repairs can be
made about June 15, 2009.
Owners may contact Volvo
Trucks at 1-800-528-6586.
09V-173
JANUARY 2009 --
Volvo Trucks is recalling
366 MY 2006-2009 VNL trucks
equipped with super single
tires, Bendix brake cam
tubes, and Volvo air
suspension. The vibration
frequency from the
suspension with super single
tires may result in a
fatigue crack of the
mounting brackets for the
brake cam tube. If left
untreated, the crack can
propagate and cause failure
of the brake cam tube
support bracket(s), which
can result in loss of
brakesat the corresponding
wheel end. Dealers will add
a support bracket to the
brake cam tube. The recall
isexpected to begin on or
about March 23, 2009. Owners
may contact Volvo Trucks at
1-800-528-6586.
09V-030 |